• Amagama ezobuchwepheshe- yini ekalwa ukusebenza kwamazinga okushisa (Tf), ukubamba izinga lokushisa (Th), umkhawulo wokushisa (Tm)?

        Sicela ubheke encazelweni yamagama obuchwepheshe. (imigomo incazelo Xhumanisa)

        I-QQ 201 20201021134408

      • Ngabe ukusika okushisayo (i-TCO) kungasetshenziswa njenge-fuse yamanje?

        Cha. I-TCO izwela kuphela ekushiseni, ngakho-ke sicela usebenzise i-TCO ngokuqinile ngaphansi kwamanje namandla ayo alinganisiwe.

      • Kungani kungekho ukuqhutshwa kwe-TCO esikhathini esithile ngemuva kokufaka i-soldering? Kungani i-TCO itholakala ivulekile ekuhlolweni ngemuva kokufaka i-soldering noma ukufaka? Ungazivikela kanjani lezi zinhlobo zezimo?

        Lokhu kungabangelwa ukushisa kwe-soldering. Ngesikhathi senqubo yokufaka i-soldering, izinga lokushisa elikhona le-TCO lifinyelele endaweni yokusebenza. Ngenxa yalokhu, i-TCO isengozini yokuxhunywa noma umonakalo omkhulu. Ukuziphatha okungalungile kufana nephoyinti le-soldering elisondele kakhulu emzimbeni we-TCO, isikhathi sokufaka isikhathi eside kakhulu, izinga lokushisa le-soldering liphezulu kakhulu.

        1555549942466789

        Ukunciphisa noma ukugwema ukulimala kwe-TCO, kuphakanyiswa ukuthi amakhasimende anake lawa macebiso alandelayo:

        1. Ibanga phakathi kwephoyinti lokudayisa nomzimba we-TCO kufanele okungenani libe ngu-10mm. ( Njengoba kukhonjisiwe kuMdwebo4. )

        2. S oldering isikhathi kufanele kube ngaphansi kuka-bo-3.

        3. Isibopho sokufaka iSoldering kufanele sisetshenziswe ngesikhathi sokunamathisela ngesandla. Njengokuqhafaza i-block ye-aluminium (noma ezinye izinsimbi ezinhle ekuqedeni ukushisa) ngezingcingo eziholayo ukusiza ukuqeda ukushisa.

        4. Cwilisa izintambo eziholayo kuketshezi olupholile (njengotshwala) ngemuva kokufaka okokufaka okokufaka okokufaka okokufaka okokufaka .

        15556321149596211555632114804879

      • Lapho i-TCO ivuselelwa, awukho umthombo wokushisa. Ngabe i-TCO ingaxhuma kanjani lapho konke okusetshenziswayo kungaphansi kokuhlolwa?

        Lokhu kungase kubangelwe le highvalue lokuxhumana resis om- kule sikhundla riveting. Lapho ulayisha okwamanje, isikhundla se-riveting sizokhiqiza ukushisa ngenxa yokumelana nokuxhumana okuphezulu futhi kudluliselwe ku-TCO. Lapho izinga lokushisa likhuphukela ku-Tf elinganisiwe, lizosebenza futhi lisike isifunda.

      • Ngabe i-TCO ingathwala ukungezwani noma ingcindezi? Yini ipharamitha?

        Icala, i-epoxy nezintambo zomthofu bezingadonswa noma zicindezelwe noma ngabe ifakwe ngaphansi kwezinga lokushisa elijwayelekile noma lapho isetshenziswa ngaphansi kwezinga lokushisa kwemvelo. Lezi zenzo zingalimaza ukushisa kwangaphakathi okuyingxenye ye-TCO.

      • Kungani iTCO isebenza ngevolumu enkulu lapho isetshenziswa ezintweni ezisetshenziswayo bese ifakwa kuhhavini wokubhaka?

        (1) Izinga lokushisa le-buffer elenziwe ngenqubo yokushisa kuhhavini lingaphakama kakhulu futhi lenze ukuthi i-TCO isebenze. (Bheka Umdwebo 6)

        (2) I lokushisainside kuhhavini akuyona iyunifomu. Ezinye izikhundla ziphakeme,ezinyeziphansi. (Bheka Umdwebo 7)

        1555557820578420 umkhiwane. 6 umkhiwane 7

        (3) Isigaxa somoya kanye nendawo okungena kuyo umoya kuvinjiwe ngoba inani likhulu kakhulu. Lapho izimbobo zehhavini zivaliwe, umoya omncane uzobe umubi futhi izinga lokushisa lizokhuphuka ngokwengxenye, okwenza ukuthi i-TCO isebenze.

      • Ngabe i-TCO ingafakwa ezindaweni zoketshezi noma zegesi?

        Cha. Uma kubhekwa inqubo ye-TCO, akuvunyelwe ukusetshenziswa ngaphansi kwemvelo ketshezi, njengamanzi noma izixazululo zezinto eziphilayo, kanye nesimo somswakama. Ayikwazi ukufakwa emvelweni wegesi elonakalisayo (njenge-sulfur dioxide, i-hydroxide) noma.

      • Kungani i-TCO isebenza ngesikhathi senqubo yeshubhu elincishiswa ukushisa? Ungasigwema kanjani lesi simo?

        Ngesikhathi senqubo yokufaka ishubhu eshisa ukushisa, izintambo eziholayo kufanele zizwe ukushisa futhi zidlulisele ukushisa ku-alloy thermal. I-TCO isebenza lapho izinga lokushisa liphakeme ngokwanele. Sicela unake ukuthi ukushisa okuphezulu noma isikhathi eside seshubhu kungalimaza i-TCO noma kubangele ukuthi i-TCO isebenze.

        Ukuze ugweme umonakalo, kuhlongozwa ukuthi amakhasimende ahlole inqubo yawo yokuthambisa. Uyacelwa ukuthi ubheke umbuzo othi "Kungani i-TCO isebenza ngobuningi bayo uma isetshenziswa kulowo mshini futhi ifakwa kuhhavini wokubhaka?". Uma usebenzisa i-heater yomoya ngesikhathi senqubo, sicela uqinisekise ukuthi ibanga nesikhathi kunengqondo ukuqinisekisa ukuthi ukushisa okudluliselwe ku-TCO ngeke kudlule izinga lokushisa elisebenzayo.

      • Ungahlola kanjani ukushisa okusebenzayo lapho wenza ukuhlolwa kwe-IQC?

        Uma ugeza uwoyela we-silicon wokuhlola izinga lokushisa elisebenza nge-TCO. Sicela unake izeluleko ezingezansi: 1. I-TCO yamanje edlulayo ingaphansi kuka-10mA. 2. Faka i-TCO kubhavu wamafutha we-silicon endaweni ka-Tf-12 ℃. (Isibonelo, i-TCO yochungechunge lwe-A4-F kufanele ifakwe kubhavu wamafutha we-silicon lapho izinga lokushisa lifinyelela ku-118 ℃). Kungcono ugcine izinga lokushisa lihlala njalo cishe imizuzu engama-30.

        I-probe kufanele inamathiselwe ku-TCO eduze ngangokunokwenzeka.

        Ungasebenzisa ihovini lokushisa elingaguquguquki ngedivayisi eshayayo ukwenza isivivinyo uma ungenayo indawo yokugeza ka-silicon. Lapho usebenzisa ihhavini lokushisa elingaguquguquki Sicela unake:

        a. Faka i-TCO kubhavu wamafutha we-silicon endaweni ka-Tf-12 ℃. Kungcono ugcine izinga lokushisa lihlala njalo cishe imizuzu engama-30.

        b. Ukuqinisekisa ukunemba kwezinga lokushisa ngaphakathi kuhhavini, kungcono ufake i-TCO kuhhavini kanye nesheke.

        c. Izinga lokushisa kukabhilidini kawoyela we-silicon likhuphuka ngesilinganiso esingu-0.5-1 f ngomzuzu kuze kube yilapho i-TCO ifakwa. Izinga lokufudumeza ngeke leqe i-1 ℃ ngomzuzu ngemuva kokufaka i-TCO

      • Ungayifaka kanjani i-TCO ukufeza ukusebenza okuhle?

        Kunezindlela ezimbili ze-TCO zokuzwa ukushisa.
        1. Umzimba we-TCO udinga ukusondelwa eduze komthombo wokushisa. I-TCO izwa ukushisa ngomzimba. Njengoba umzimba we-TCO (uhlobo lwengxubevange) ungenalo ukuxhumana okuqondile ne-alloy ye-thermal, kuthatha isikhathi esithe xaxa lapho ukushisa okusuka emzimbeni kudluliselwa ku-alloy thermal. Izinga lokudlulisa ukushisa lihamba kancane ngohlobo lokufakwa. Ukuxhunywa kwesenzo bekuzofika ngokulibaziseka.
        2. Izintambo ezihola phambili ze-TCO zidinga ukusondelwa eduze komthombo wokushisa noma ukuxhunyaniswa nomthombo wokushisa ngqo. I-TCO izwa ukushisa ngezintambo eziholayo. Njengoba izintambo eziholayo zixhunywe ku-alloy thermal ngqo, i-alloy thermal ingazizwa umthombo wokushisa uma izintambo eziholayo zikuzwa. Ngoba izintambo eziholayo azinamakhaza, kuphakanyiswa ukuthi amakhasimende abeke ukudluliswa okuhle kokushisa futhi amelane kahle nokushiswa kwamandla ngaphandle kwazo. PS: I-TCO ayivunyelwe ukumiswa ngaphakathi kwemishini.